Usable water-supply records with plausible depth values.
Well Drilling Cost in Northumberland County, Ontario
Well drilling cost in Northumberland County depends heavily on depth, casing, geology, access and quote inclusions. Local records show a 67 ft median depth and a 40–118 ft typical range to help frame contractor conversations.
27% shallower than Ontario's 92 ft median.
Map and well records in Northumberland County
Filter local records by depth, yield and completion year. The sorted well list updates with the map.
Half of usable records are shallower and half deeper.
More affected by unusually deep wells than the median.
The middle 50% of recorded depths.
Records below 10 ft are excluded.
An observed extreme, not a drilling expectation.
How much does it cost to drill a well in Northumberland County?
There is no trustworthy single price for Northumberland County. Official records do not include invoices, but they show that the middle half of recorded wells are 40–118 ft deep. Contractors must still price casing, geology, access, pump equipment, site work and exclusions for the specific property.
More than depth: what Northumberland County records contain
These fields come from a stratified sample of 2,000 local records and are shown with coverage counts.
Typical sampled range: 4–8 GPM across 1,959 records.
Middle 50%: 10–47 ft below ground across 1,921 records.
Cable Tool (1446) · Boring (200) · Digging (116)
Clay (1728) · Gravel (1220) · Limestone (518)
Newest sampled record: 2024 · 399 completed since 2015.
How recorded pump-test yields compare
Median yield is calculated from reported GPM values in a stratified sample of up to 2,000 usable records per region.
Yield reflects the rate reported during historical well testing. Testing methods, duration and record completeness vary, so these figures provide regional context rather than guaranteed supply.
Recorded depth distribution in Northumberland County
Most usable records fall between 40 and 118 ft. The average is 22 ft above the median, showing how extreme wells influence a simple average.
What stands out
- Regional depth contextThe local median is 27% shallower than Ontario overall.
- Useful pump-test coverage93% of usable records include a reported GPM value.
- Meaningful local variabilityThe middle half of wells spans 78 vertical feet.
What should a Northumberland County well quote include?
Compare written scopes rather than multiplying a regional depth by a generic per-foot rate.
Per-foot rate, minimum charge, bore diameter and what happens if the well must go deeper.
Included casing footage, material, extra-foot rate, grout and sanitary completion.
Pump, drop pipe, wire, pressure tank, controls, pitless adapter and installation.
Mobilization, rig access, trenching, waterline, electrical runs and restoration.
Pump testing, laboratory water tests and whether treatment equipment is excluded.
HST, permits or approvals, unsuccessful-hole terms and other stated exclusions.
Price disclaimer: WellEstimate does not have verified contractor transaction data for this region and therefore does not publish a regional dollar estimate.
Request a site-specific contractor quote →Northumberland County well drilling cost FAQ
Practical answers grounded in local records, with the limits of preliminary planning made clear.
How much does it cost to drill a well in Northumberland County?
The official well records do not contain contractor prices, so a reliable local dollar figure cannot be calculated from them. Ask licensed contractors for itemized quotes based on the property, expected depth, casing, access, pump, trenching, electrical work, testing and treatment.
How deep are wells in Northumberland County?
The median recorded water-supply well depth is 67 feet. The middle 50% of 15,345 usable local records ranges from 40 to 118 feet.
What affects well drilling cost in Northumberland County?
Important cost factors include required depth, casing and overburden, bedrock conditions, drill-rig access, mobilization, pump sizing, trenching, pressure equipment, water treatment and testing.
What should a Northumberland County well drilling quote include?
Compare the drilling rate and minimum charge, included casing and grout, pump and pressure equipment, mobilization, trenching, electrical work, testing, restoration, HST, exclusions and additional-depth terms.
Can nearby wells predict the cost of a new well in Northumberland County?
Nearby records can show historical depth, geology, yield and construction patterns, but they cannot predict an exact new-well depth or price. Use them to test quote assumptions, then rely on a licensed contractor's written site-specific scope.
Deepest and shallowest wells in Northumberland County
Well IDs connect these observations back to individual government records. Extremes should not be treated as expected depths.
Deepest recorded wells
| # | Depth | Municipality | Year | Well ID |
|---|---|---|---|---|
| 1 | 978 ft | HAMILTON | 2005 | 4514437 |
| 2 | 787 ft | HALDIMAND | 2003 | 4513683 |
| 3 | 745 ft | HAMILTON | 2005 | 4514574 |
| 4 | 655 ft | HALDIMAND | 1995 | 4510685 |
| 5 | 560 ft | HALDIMAND | 1993 | 4509996 |
Shallowest recorded wells
| # | Depth | Municipality | Year | Well ID |
|---|---|---|---|---|
| 1 | 10 ft | SEYMOUR | 1965 | 4501781 |
| 2 | 10 ft | SEYMOUR | 1953 | 4501931 |
| 3 | 10 ft | SEYMOUR | 1971 | 4503006 |
| 4 | 10 ft | MURRAY | 1992 | 4509714 |
| 5 | 10 ft | CRAMAHE | 1988 | 4507618 |
Regional statistics are only the starting point.
Well depths can vary within Northumberland County. Enter your address to analyze reported wells around your exact location and build a preliminary property report.
Source: Ontario Water Well Information System · dataset through 2025-08-31 · Water-supply wells with recorded depths from 10 to 1,500 ft. Percentiles use sorted recorded depth. Information disclaimer: Historical records are planning context, not a site assessment or professional advice. Records may be incomplete, approximately located or unrepresentative of a future well.