Usable water-supply records with plausible depth values.
Well Drilling Cost in Leeds and Grenville, Ontario
Well drilling cost in Leeds and Grenville depends heavily on depth, casing, geology, access and quote inclusions. Local records show a 90 ft median depth and a 65–124 ft typical range to help frame contractor conversations.
2% shallower than Ontario's 92 ft median.
Map and well records in Leeds and Grenville
Filter local records by depth, yield and completion year. The sorted well list updates with the map.
Half of usable records are shallower and half deeper.
More affected by unusually deep wells than the median.
The middle 50% of recorded depths.
Records below 10 ft are excluded.
An observed extreme, not a drilling expectation.
How much does it cost to drill a well in Leeds and Grenville?
There is no trustworthy single price for Leeds and Grenville. Official records do not include invoices, but they show that the middle half of recorded wells are 65–124 ft deep. Contractors must still price casing, geology, access, pump equipment, site work and exclusions for the specific property.
More than depth: what Leeds and Grenville records contain
These fields come from a stratified sample of 2,000 local records and are shown with coverage counts.
Typical sampled range: 5–15 GPM across 1,964 records.
Middle 50%: 10–25 ft below ground across 1,954 records.
Air Percussion (791) · Cable Tool (694) · Rotary (Convent.) (356)
Limestone (1163) · Clay (846) · Sandstone (648)
Newest sampled record: 2024 · 379 completed since 2015.
How recorded pump-test yields compare
Median yield is calculated from reported GPM values in a stratified sample of up to 2,000 usable records per region.
Yield reflects the rate reported during historical well testing. Testing methods, duration and record completeness vary, so these figures provide regional context rather than guaranteed supply.
Recorded depth distribution in Leeds and Grenville
Most usable records fall between 65 and 124 ft. The average is 15 ft above the median, showing how extreme wells influence a simple average.
What stands out
- Regional depth contextThe local median is 2% shallower than Ontario overall.
- Useful pump-test coverage92% of usable records include a reported GPM value.
- Meaningful local variabilityThe middle half of wells spans 59 vertical feet.
What should a Leeds and Grenville well quote include?
Compare written scopes rather than multiplying a regional depth by a generic per-foot rate.
Per-foot rate, minimum charge, bore diameter and what happens if the well must go deeper.
Included casing footage, material, extra-foot rate, grout and sanitary completion.
Pump, drop pipe, wire, pressure tank, controls, pitless adapter and installation.
Mobilization, rig access, trenching, waterline, electrical runs and restoration.
Pump testing, laboratory water tests and whether treatment equipment is excluded.
HST, permits or approvals, unsuccessful-hole terms and other stated exclusions.
Price disclaimer: WellEstimate does not have verified contractor transaction data for this region and therefore does not publish a regional dollar estimate.
Request a site-specific contractor quote →Leeds and Grenville well drilling cost FAQ
Practical answers grounded in local records, with the limits of preliminary planning made clear.
How much does it cost to drill a well in Leeds and Grenville?
The official well records do not contain contractor prices, so a reliable local dollar figure cannot be calculated from them. Ask licensed contractors for itemized quotes based on the property, expected depth, casing, access, pump, trenching, electrical work, testing and treatment.
How deep are wells in Leeds and Grenville?
The median recorded water-supply well depth is 90 feet. The middle 50% of 27,447 usable local records ranges from 65 to 124 feet.
What affects well drilling cost in Leeds and Grenville?
Important cost factors include required depth, casing and overburden, bedrock conditions, drill-rig access, mobilization, pump sizing, trenching, pressure equipment, water treatment and testing.
What should a Leeds and Grenville well drilling quote include?
Compare the drilling rate and minimum charge, included casing and grout, pump and pressure equipment, mobilization, trenching, electrical work, testing, restoration, HST, exclusions and additional-depth terms.
Can nearby wells predict the cost of a new well in Leeds and Grenville?
Nearby records can show historical depth, geology, yield and construction patterns, but they cannot predict an exact new-well depth or price. Use them to test quote assumptions, then rely on a licensed contractor's written site-specific scope.
Deepest and shallowest wells in Leeds and Grenville
Well IDs connect these observations back to individual government records. Extremes should not be treated as expected depths.
Deepest recorded wells
| # | Depth | Municipality | Year | Well ID |
|---|---|---|---|---|
| 1 | 1,289 ft | OXFORD | 2006 | 3515329 |
| 2 | 624 ft | FRONT OF LEEDS & LANSDOWNE (LEEDS) | 1986 | 3609716 |
| 3 | 620 ft | FRONT OF YONGE | 2004 | 3616265 |
| 4 | 601 ft | AUGUSTA | 2007 | 7050889 |
| 5 | 594 ft | EDWARDSBURGH | 2018 | 7327879 |
Shallowest recorded wells
| # | Depth | Municipality | Year | Well ID |
|---|---|---|---|---|
| 1 | 10 ft | OXFORD | 1969 | 2401908 |
| 2 | 10 ft | EDWARDSBURGH | 1980 | 2404362 |
| 3 | 10 ft | EDWARDSBURGH | 2015 | 7252180 |
| 4 | 11 ft | SOUTH CROSBY | 1956 | 3603353 |
| 5 | 11 ft | ELIZABETHTOWN | 1985 | 3609276 |
Regional statistics are only the starting point.
Well depths can vary within Leeds and Grenville. Enter your address to analyze reported wells around your exact location and build a preliminary property report.
Source: Ontario Water Well Information System · dataset through 2025-08-31 · Water-supply wells with recorded depths from 10 to 1,500 ft. Percentiles use sorted recorded depth. Information disclaimer: Historical records are planning context, not a site assessment or professional advice. Records may be incomplete, approximately located or unrepresentative of a future well.