Usable water-supply records with plausible depth values.
25,200 LOCAL WELL RECORDS
Well Drilling Cost in York Region, Ontario
Well drilling cost in York Region depends heavily on depth, casing, geology, access and quote inclusions. Local records show a 98 ft median depth and a 57–158 ft typical range to help frame contractor conversations.
Median recorded depth98 ft
7% deeper than Ontario's 92 ft median.
INTERACTIVE LOCAL WELL EXPLORER
Map and well records in York Region
Filter local records by depth, yield and completion year. The sorted well list updates with the map.
Loading regional well records…
Half of usable records are shallower and half deeper.
More affected by unusually deep wells than the median.
The middle 50% of recorded depths.
Records below 10 ft are excluded.
An observed extreme, not a drilling expectation.
LOCAL COST CONTEXT
How much does it cost to drill a well in York Region?
There is no trustworthy single price for York Region. Official records do not include invoices, but they show that the middle half of recorded wells are 57–158 ft deep. Contractors must still price casing, geology, access, pump equipment, site work and exclusions for the specific property.
WATER & CONSTRUCTION SIGNALS
More than depth: what York Region records contain
These fields come from a stratified sample of 2,000 local records and are shown with coverage counts.
Typical sampled range: 4–10 GPM across 1,933 records.
Middle 50%: 10–60 ft below ground across 1,909 records.
Cable Tool (700) · Rotary (Convent.) (577) · Boring (381)
Clay (1879) · Gravel (820) · Medium sand (659)
Newest sampled record: 2024 · 400 completed since 2015.
REGIONAL WELL YIELD
How recorded pump-test yields compare
Median yield is calculated from reported GPM values in a stratified sample of up to 2,000 usable records per region.
RegionRelative median yieldMedianMiddle 50%Yield recordsCoverage
Perth County12 GPM10–15 GPM1,97599%Waterloo Region10 GPM8–15 GPM1,83792%Dufferin County10 GPM5–10 GPM1,92996%Wellington County10 GPM8–15 GPM1,91696%Leeds and Grenville10 GPM5–15 GPM1,96498%Huron County10 GPM10–15 GPM1,97099%Tiny Township10 GPM5–12 GPM1,72786%Milton10 GPM5–12 GPM1,85893%Oxford County9 GPM5–15 GPM1,95798%Bruce County8 GPM5–10 GPM1,96498%York Region6 GPM4–10 GPM1,93397%Yield reflects the rate reported during historical well testing. Testing methods, duration and record completeness vary, so these figures provide regional context rather than guaranteed supply.
Recorded depth distribution in York Region
0 ftMedian 98 ft400 ft
Most usable records fall between 57 and 158 ft. The average is 21 ft above the median, showing how extreme wells influence a simple average.
What stands out
- Regional depth contextThe local median is 7% deeper than Ontario overall.
- Useful pump-test coverage94% of usable records include a reported GPM value.
- Meaningful local variabilityThe middle half of wells spans 101 vertical feet.
ACCURATE COST PLANNING
What should a York Region well quote include?
Compare written scopes rather than multiplying a regional depth by a generic per-foot rate.
Per-foot rate, minimum charge, bore diameter and what happens if the well must go deeper.
Included casing footage, material, extra-foot rate, grout and sanitary completion.
Pump, drop pipe, wire, pressure tank, controls, pitless adapter and installation.
Mobilization, rig access, trenching, waterline, electrical runs and restoration.
Pump testing, laboratory water tests and whether treatment equipment is excluded.
HST, permits or approvals, unsuccessful-hole terms and other stated exclusions.
Price disclaimer: WellEstimate does not have verified contractor transaction data for this region and therefore does not publish a regional dollar estimate.
Request a site-specific contractor quote →LOCAL COST QUESTIONS
York Region well drilling cost FAQ
Practical answers grounded in local records, with the limits of preliminary planning made clear.
How much does it cost to drill a well in York Region?
The official well records do not contain contractor prices, so a reliable local dollar figure cannot be calculated from them. Ask licensed contractors for itemized quotes based on the property, expected depth, casing, access, pump, trenching, electrical work, testing and treatment.
How deep are wells in York Region?
The median recorded water-supply well depth is 98 feet. The middle 50% of 25,200 usable local records ranges from 57 to 158 feet.
What affects well drilling cost in York Region?
Important cost factors include required depth, casing and overburden, bedrock conditions, drill-rig access, mobilization, pump sizing, trenching, pressure equipment, water treatment and testing.
What should a York Region well drilling quote include?
Compare the drilling rate and minimum charge, included casing and grout, pump and pressure equipment, mobilization, trenching, electrical work, testing, restoration, HST, exclusions and additional-depth terms.
Can nearby wells predict the cost of a new well in York Region?
Nearby records can show historical depth, geology, yield and construction patterns, but they cannot predict an exact new-well depth or price. Use them to test quote assumptions, then rely on a licensed contractor's written site-specific scope.
TRACEABLE WELL RECORDS
Deepest and shallowest wells in York Region
Well IDs connect these observations back to individual government records. Extremes should not be treated as expected depths.
Deepest recorded wells
| # | Depth | Municipality | Year | Well ID |
|---|---|---|---|---|
| 1 | 1,027 ft | WHITCHURCH-STOUFFVILLE (WHITCHURCH TWP) | 2005 | 6929391 |
| 2 | 1,017 ft | WHITCHURCH-STOUFFVILLE (WHITCHURCH TWP) | 2004 | 6927973 |
| 3 | 1,010 ft | EAST GWILLIMBURY | 2004 | 6928624 |
| 4 | 853 ft | GEORGINA (NORTH GWILLIMBURY) | 2003 | 6927504 |
| 5 | 837 ft | WHITCHURCH-STOUFFVILLE (WHITCHURCH TWP) | 2005 | 6929387 |
Shallowest recorded wells
| # | Depth | Municipality | Year | Well ID |
|---|---|---|---|---|
| 1 | 10 ft | NEWMARKET (EAST GWILLIMBURY) | 1955 | 6900051 |
| 2 | 10 ft | EAST GWILLIMBURY | 1967 | 6900569 |
| 3 | 10 ft | EAST GWILLIMBURY | 1967 | 6900662 |
| 4 | 10 ft | KING | 1965 | 6902213 |
| 5 | 10 ft | MARKHAM (MARKHAM TWP) | 1964 | 6903504 |
FIND WELLS NEAR YOUR PROPERTY
Analyze my propertyRegional statistics are only the starting point.
Well depths can vary within York Region. Enter your address to analyze reported wells around your exact location and build a preliminary property report.
Source: Ontario Water Well Information System · dataset through 2025-08-31 · Water-supply wells with recorded depths from 10 to 1,500 ft. Percentiles use sorted recorded depth. Information disclaimer: Historical records are planning context, not a site assessment or professional advice. Records may be incomplete, approximately located or unrepresentative of a future well.