Usable water-supply records with plausible depth values.
Well Drilling Cost in Norfolk County, Ontario
Well drilling cost in Norfolk County depends heavily on depth, casing, geology, access and quote inclusions. Local records show a 40 ft median depth and a 28–64 ft typical range to help frame contractor conversations.
57% shallower than Ontario's 92 ft median.
Map and well records in Norfolk County
Filter local records by depth, yield and completion year. The sorted well list updates with the map.
Half of usable records are shallower and half deeper.
More affected by unusually deep wells than the median.
The middle 50% of recorded depths.
Records below 10 ft are excluded.
An observed extreme, not a drilling expectation.
How much does it cost to drill a well in Norfolk County?
There is no trustworthy single price for Norfolk County. Official records do not include invoices, but they show that the middle half of recorded wells are 28–64 ft deep. Contractors must still price casing, geology, access, pump equipment, site work and exclusions for the specific property.
More than depth: what Norfolk County records contain
These fields come from a stratified sample of 2,000 local records and are shown with coverage counts.
Typical sampled range: 5–12 GPM across 1,732 records.
Middle 50%: 9–29 ft below ground across 1,718 records.
Cable Tool (1336) · Rotary (Convent.) (275) · Boring (206)
Clay (1195) · Medium sand (820) · Fine sand (522)
Newest sampled record: 2024 · 396 completed since 2015.
How recorded pump-test yields compare
Median yield is calculated from reported GPM values in a stratified sample of up to 2,000 usable records per region.
Yield reflects the rate reported during historical well testing. Testing methods, duration and record completeness vary, so these figures provide regional context rather than guaranteed supply.
Recorded depth distribution in Norfolk County
Most usable records fall between 28 and 64 ft. The average is 16 ft above the median, showing how extreme wells influence a simple average.
What stands out
- Regional depth contextThe local median is 57% shallower than Ontario overall.
- Useful pump-test coverage91% of usable records include a reported GPM value.
- Meaningful local variabilityThe middle half of wells spans 36 vertical feet.
What should a Norfolk County well quote include?
Compare written scopes rather than multiplying a regional depth by a generic per-foot rate.
Per-foot rate, minimum charge, bore diameter and what happens if the well must go deeper.
Included casing footage, material, extra-foot rate, grout and sanitary completion.
Pump, drop pipe, wire, pressure tank, controls, pitless adapter and installation.
Mobilization, rig access, trenching, waterline, electrical runs and restoration.
Pump testing, laboratory water tests and whether treatment equipment is excluded.
HST, permits or approvals, unsuccessful-hole terms and other stated exclusions.
Price disclaimer: WellEstimate does not have verified contractor transaction data for this region and therefore does not publish a regional dollar estimate.
Request a site-specific contractor quote →Norfolk County well drilling cost FAQ
Practical answers grounded in local records, with the limits of preliminary planning made clear.
How much does it cost to drill a well in Norfolk County?
The official well records do not contain contractor prices, so a reliable local dollar figure cannot be calculated from them. Ask licensed contractors for itemized quotes based on the property, expected depth, casing, access, pump, trenching, electrical work, testing and treatment.
How deep are wells in Norfolk County?
The median recorded water-supply well depth is 40 feet. The middle 50% of 8,728 usable local records ranges from 28 to 64 feet.
What affects well drilling cost in Norfolk County?
Important cost factors include required depth, casing and overburden, bedrock conditions, drill-rig access, mobilization, pump sizing, trenching, pressure equipment, water treatment and testing.
What should a Norfolk County well drilling quote include?
Compare the drilling rate and minimum charge, included casing and grout, pump and pressure equipment, mobilization, trenching, electrical work, testing, restoration, HST, exclusions and additional-depth terms.
Can nearby wells predict the cost of a new well in Norfolk County?
Nearby records can show historical depth, geology, yield and construction patterns, but they cannot predict an exact new-well depth or price. Use them to test quote assumptions, then rely on a licensed contractor's written site-specific scope.
Deepest and shallowest wells in Norfolk County
Well IDs connect these observations back to individual government records. Extremes should not be treated as expected depths.
Deepest recorded wells
| # | Depth | Municipality | Year | Well ID |
|---|---|---|---|---|
| 1 | 860 ft | CHARLOTTEVILLE | 2002 | 4407888 |
| 2 | 660 ft | TOWNSEND | 1967 | 4401602 |
| 3 | 565 ft | NORTH WALSINGHAM | 1963 | 4400979 |
| 4 | 550 ft | TOWNSEND | 1960 | 4401417 |
| 5 | 510 ft | MIDDLETON | 1972 | 4402871 |
Shallowest recorded wells
| # | Depth | Municipality | Year | Well ID |
|---|---|---|---|---|
| 1 | 10 ft | NORTH WALSINGHAM | 1954 | 4400974 |
| 2 | 10 ft | NORTH WALSINGHAM | 1959 | 4401000 |
| 3 | 10 ft | CHARLOTTEVILLE | 1956 | 4400294 |
| 4 | 10 ft | CHARLOTTEVILLE | 1961 | 4400362 |
| 5 | 10 ft | MIDDLETON | 1956 | 4400875 |
Regional statistics are only the starting point.
Well depths can vary within Norfolk County. Enter your address to analyze reported wells around your exact location and build a preliminary property report.
Source: Ontario Water Well Information System · dataset through 2025-08-31 · Water-supply wells with recorded depths from 10 to 1,500 ft. Percentiles use sorted recorded depth. Information disclaimer: Historical records are planning context, not a site assessment or professional advice. Records may be incomplete, approximately located or unrepresentative of a future well.