Usable water-supply records with plausible depth values.
Well Drilling Cost in Wheatland County, Alberta
Well drilling cost in Wheatland County depends heavily on depth, casing, geology, access and quote inclusions. Local records show a 140 ft median depth and a 94–200 ft typical range to help frame contractor conversations.
About the same as Alberta's 140 ft median.
Map and well records in Wheatland County
Search an address to focus nearby records, or filter by depth, yield and completion year. The sorted well list updates with the map.
Half of usable records are shallower and half deeper.
More affected by unusually deep wells than the median.
The middle 50% of recorded depths.
Records below 10 ft are excluded.
An observed extreme, not a drilling expectation.
How much does it cost to drill a well in Wheatland County?
There is no trustworthy single price for Wheatland County. Official records do not include invoices, but they show that the middle half of recorded wells are 94–200 ft deep. Contractors must still price casing, geology, access, pump equipment, site work and exclusions for the specific property.
More than depth: what Wheatland County records contain
These fields come from a stratified sample of 7,548 local records and are shown with coverage counts.
Typical sampled range: 5–15 GPM across 3,426 records.
Middle 50%: —–— ft below ground across 0 records.
Rotary (4068) · Unknown (1243) · Drilled (695)
Newest sampled record: 2026 · 619 completed since 2015.
Recorded depth distribution in Wheatland County
Most usable records fall between 94 and 200 ft. The average is 17 ft above the median, showing how extreme wells influence a simple average.
What stands out
- Regional depth contextThe local median matches Alberta overall.
- Useful pump-test coverage46% of usable records include a reported GPM value.
- Meaningful local variabilityThe middle half of wells spans 106 vertical feet.
What should a Wheatland County well quote include?
Compare written scopes rather than multiplying a regional depth by a generic per-foot rate.
Per-foot rate, minimum charge, bore diameter and what happens if the well must go deeper.
Included casing footage, material, extra-foot rate, grout and sanitary completion.
Pump, drop pipe, wire, pressure tank, controls, pitless adapter and installation.
Mobilization, rig access, trenching, waterline, electrical runs and restoration.
Pump testing, laboratory water tests and whether treatment equipment is excluded.
Taxes, permits or approvals, unsuccessful-hole terms and other stated exclusions.
Price disclaimer: WellEstimate does not have verified contractor transaction data for this region and therefore does not publish a regional dollar estimate.
Request a site-specific contractor quote →Wheatland County well drilling cost FAQ
Practical answers grounded in local records, with the limits of preliminary planning made clear.
How much does it cost to drill a well in Wheatland County?
The official well records do not contain contractor prices, so a reliable local dollar figure cannot be calculated from them. Ask licensed contractors for itemized quotes based on the property, expected depth, casing, access, pump, trenching, electrical work, testing and treatment.
How deep are wells in Wheatland County?
The median recorded water-supply well depth is 140 feet. The middle 50% of 7,548 usable local records ranges from 94 to 200 feet.
What affects well drilling cost in Wheatland County?
Important cost factors include required depth, casing and overburden, bedrock conditions, drill-rig access, mobilization, pump sizing, trenching, pressure equipment, water treatment and testing.
What should a Wheatland County well drilling quote include?
Compare the drilling rate and minimum charge, included casing and grout, pump and pressure equipment, mobilization, trenching, electrical work, testing, restoration, taxes, exclusions and additional-depth terms.
Can nearby wells predict the cost of a new well in Wheatland County?
Nearby records can show historical depth, geology, yield and construction patterns, but they cannot predict an exact new-well depth or price. Use them to test quote assumptions, then rely on a licensed contractor's written site-specific scope.
Deepest and shallowest wells in Wheatland County
Well IDs connect these observations back to individual government records. Extremes should not be treated as expected depths.
Deepest recorded wells
| # | Depth | Municipality | Year | Well ID |
|---|---|---|---|---|
| 1 | 1,220 ft | Wheatland County | 1953 | 233744 |
| 2 | 1,120 ft | Wheatland County | 1954 | 238329 |
| 3 | 944 ft | Wheatland County | 1953 | 225079 |
| 4 | 921 ft | Wheatland County | 1953 | 225205 |
| 5 | 904 ft | Wheatland County | 1953 | 225170 |
Shallowest recorded wells
| # | Depth | Municipality | Year | Well ID |
|---|---|---|---|---|
| 1 | 10 ft | Wheatland County | Not reported | 112847 |
| 2 | 10 ft | Wheatland County | Not reported | 113239 |
| 3 | 10 ft | Wheatland County | Not reported | 122420 |
| 4 | 10 ft | Wheatland County | 1917 | 134494 |
| 5 | 10 ft | Wheatland County | Not reported | 158272 |
Regional statistics are only the starting point.
Well depths can vary within Wheatland County. Enter your address to analyze reported wells around your exact location and build a preliminary property report.
Source: Alberta Water Well Information Database (AWWID) · dataset through 2026-08-12 · Alberta domestic/stock/municipal water-well reports with recorded depths from 10 to 1,500 ft (imperial AWWID units). Regional counts use OData totals; depth percentiles use sampled report pages within each bbox. Information disclaimer: Historical records are planning context, not a site assessment or professional advice. Records may be incomplete, approximately located or unrepresentative of a future well. Open Government Licence – Alberta.