29,512 LOCAL WELL RECORDS

Well Drilling Cost in Rocky View County, Alberta

Well drilling cost in Rocky View County depends heavily on depth, casing, geology, access and quote inclusions. Local records show a 139 ft median depth and a 95200 ft typical range to help frame contractor conversations.

Median recorded depth139 ft

1% shallower than Alberta's 140 ft median.

INTERACTIVE LOCAL WELL EXPLORER

Map and well records in Rocky View County

Search an address to focus nearby records, or filter by depth, yield and completion year. The sorted well list updates with the map.

Preparing map…
Reported wells analyzed29,512

Usable water-supply records with plausible depth values.

Median depth139 ft

Half of usable records are shallower and half deeper.

Average depth158 ft

More affected by unusually deep wells than the median.

Typical range95200 ft

The middle 50% of recorded depths.

Shallowest included10 ft

Records below 10 ft are excluded.

Deepest included1,420 ft

An observed extreme, not a drilling expectation.

LOCAL COST CONTEXT

How much does it cost to drill a well in Rocky View County?

There is no trustworthy single price for Rocky View County. Official records do not include invoices, but they show that the middle half of recorded wells are 95200 ft deep. Contractors must still price casing, geology, access, pump equipment, site work and exclusions for the specific property.

Typical local depth95200 ft
Local price evidenceNot recorded
Price disclaimer:Historical depth records are not invoices or quotes. Only a contractor's written, site-specific scope can establish project pricing.
WATER & CONSTRUCTION SIGNALS

More than depth: what Rocky View County records contain

These fields come from a stratified sample of 8,000 local records and are shown with coverage counts.

Recorded well yield6 GPM median

Typical sampled range: 410 GPM across 2,445 records.

Static water level ft median

Middle 50%: ft below ground across 0 records.

Common drilling methodRotary

Rotary (4072) · Cable Tool (1432) · Drilled (1220)

Common logged geologyVaried

Completion eraMedian year 1985

Newest sampled record: 2002 · 0 completed since 2015.

HOW DEEP ARE WELLS?

Recorded depth distribution in Rocky View County

0 ftMedian 139 ft400 ft

Most usable records fall between 95 and 200 ft. The average is 19 ft above the median, showing how extreme wells influence a simple average.

LOCAL INSIGHTS

What stands out

  1. Regional depth contextThe local median is 1% shallower than Alberta overall.
  2. Useful pump-test coverage45% of usable records include a reported GPM value.
  3. Meaningful local variabilityThe middle half of wells spans 105 vertical feet.
ACCURATE COST PLANNING

What should a Rocky View County well quote include?

Compare written scopes rather than multiplying a regional depth by a generic per-foot rate.

Drilling scope

Per-foot rate, minimum charge, bore diameter and what happens if the well must go deeper.

Casing and sealing

Included casing footage, material, extra-foot rate, grout and sanitary completion.

Pump system

Pump, drop pipe, wire, pressure tank, controls, pitless adapter and installation.

Site work

Mobilization, rig access, trenching, waterline, electrical runs and restoration.

Testing and treatment

Pump testing, laboratory water tests and whether treatment equipment is excluded.

Taxes and contingencies

Taxes, permits or approvals, unsuccessful-hole terms and other stated exclusions.

Price disclaimer: WellEstimate does not have verified contractor transaction data for this region and therefore does not publish a regional dollar estimate.

Request a site-specific contractor quote →
LOCAL COST QUESTIONS

Rocky View County well drilling cost FAQ

Practical answers grounded in local records, with the limits of preliminary planning made clear.

How much does it cost to drill a well in Rocky View County?

The official well records do not contain contractor prices, so a reliable local dollar figure cannot be calculated from them. Ask licensed contractors for itemized quotes based on the property, expected depth, casing, access, pump, trenching, electrical work, testing and treatment.

How deep are wells in Rocky View County?

The median recorded water-supply well depth is 139 feet. The middle 50% of 29,512 usable local records ranges from 95 to 200 feet.

What affects well drilling cost in Rocky View County?

Important cost factors include required depth, casing and overburden, bedrock conditions, drill-rig access, mobilization, pump sizing, trenching, pressure equipment, water treatment and testing.

What should a Rocky View County well drilling quote include?

Compare the drilling rate and minimum charge, included casing and grout, pump and pressure equipment, mobilization, trenching, electrical work, testing, restoration, taxes, exclusions and additional-depth terms.

Can nearby wells predict the cost of a new well in Rocky View County?

Nearby records can show historical depth, geology, yield and construction patterns, but they cannot predict an exact new-well depth or price. Use them to test quote assumptions, then rely on a licensed contractor's written site-specific scope.

TRACEABLE WELL RECORDS

Deepest and shallowest wells in Rocky View County

Well IDs connect these observations back to individual government records. Extremes should not be treated as expected depths.

Deepest recorded wells

#DepthMunicipalityYearWell ID
11,420 ftRocky View County1954126999
21,220 ftRocky View County1954238642
31,120 ftRocky View County1954125982
41,120 ftRocky View County1954238329
51,120 ftRocky View County1954238625

Shallowest recorded wells

#DepthMunicipalityYearWell ID
110 ftRocky View CountyNot reported122040
210 ftRocky View CountyNot reported126183
310 ftRocky View CountyNot reported128684
410 ftRocky View CountyNot reported131410
510 ftRocky View County1986251528
FIND WELLS NEAR YOUR PROPERTY

Regional statistics are only the starting point.

Well depths can vary within Rocky View County. Enter your address to analyze reported wells around your exact location and build a preliminary property report.

Analyze my property

Source: Alberta Water Well Information Database (AWWID) · dataset through 2026-08-12 · Alberta domestic/stock/municipal water-well reports with recorded depths from 10 to 1,500 ft (imperial AWWID units). Regional counts use OData totals; depth percentiles use sampled report pages within each bbox. Information disclaimer: Historical records are planning context, not a site assessment or professional advice. Records may be incomplete, approximately located or unrepresentative of a future well. Open Government Licence – Alberta.

Planning a well?Contact us