21,267 LOCAL WELL RECORDS

Well Drilling Cost in Foothills County, Alberta

Well drilling cost in Foothills County depends heavily on depth, casing, geology, access and quote inclusions. Local records show a 135 ft median depth and a 85200 ft typical range to help frame contractor conversations.

Median recorded depth135 ft

4% shallower than Alberta's 140 ft median.

INTERACTIVE LOCAL WELL EXPLORER

Map and well records in Foothills County

Search an address to focus nearby records, or filter by depth, yield and completion year. The sorted well list updates with the map.

Preparing map…
Reported wells analyzed21,267

Usable water-supply records with plausible depth values.

Median depth135 ft

Half of usable records are shallower and half deeper.

Average depth153 ft

More affected by unusually deep wells than the median.

Typical range85200 ft

The middle 50% of recorded depths.

Shallowest included10 ft

Records below 10 ft are excluded.

Deepest included1,420 ft

An observed extreme, not a drilling expectation.

LOCAL COST CONTEXT

How much does it cost to drill a well in Foothills County?

There is no trustworthy single price for Foothills County. Official records do not include invoices, but they show that the middle half of recorded wells are 85200 ft deep. Contractors must still price casing, geology, access, pump equipment, site work and exclusions for the specific property.

Typical local depth85200 ft
Local price evidenceNot recorded
Price disclaimer:Historical depth records are not invoices or quotes. Only a contractor's written, site-specific scope can establish project pricing.
WATER & CONSTRUCTION SIGNALS

More than depth: what Foothills County records contain

These fields come from a stratified sample of 8,000 local records and are shown with coverage counts.

Recorded well yield5 GPM median

Typical sampled range: 410 GPM across 2,538 records.

Static water level ft median

Middle 50%: ft below ground across 0 records.

Common drilling methodRotary

Rotary (4403) · Cable Tool (1322) · Drilled (1243)

Common logged geologyVaried

Completion eraMedian year 1989

Newest sampled record: 2002 · 0 completed since 2015.

HOW DEEP ARE WELLS?

Recorded depth distribution in Foothills County

0 ftMedian 135 ft400 ft

Most usable records fall between 85 and 200 ft. The average is 18 ft above the median, showing how extreme wells influence a simple average.

LOCAL INSIGHTS

What stands out

  1. Regional depth contextThe local median is 4% shallower than Alberta overall.
  2. Useful pump-test coverage41% of usable records include a reported GPM value.
  3. Meaningful local variabilityThe middle half of wells spans 115 vertical feet.
ACCURATE COST PLANNING

What should a Foothills County well quote include?

Compare written scopes rather than multiplying a regional depth by a generic per-foot rate.

Drilling scope

Per-foot rate, minimum charge, bore diameter and what happens if the well must go deeper.

Casing and sealing

Included casing footage, material, extra-foot rate, grout and sanitary completion.

Pump system

Pump, drop pipe, wire, pressure tank, controls, pitless adapter and installation.

Site work

Mobilization, rig access, trenching, waterline, electrical runs and restoration.

Testing and treatment

Pump testing, laboratory water tests and whether treatment equipment is excluded.

Taxes and contingencies

Taxes, permits or approvals, unsuccessful-hole terms and other stated exclusions.

Price disclaimer: WellEstimate does not have verified contractor transaction data for this region and therefore does not publish a regional dollar estimate.

Request a site-specific contractor quote →
LOCAL COST QUESTIONS

Foothills County well drilling cost FAQ

Practical answers grounded in local records, with the limits of preliminary planning made clear.

How much does it cost to drill a well in Foothills County?

The official well records do not contain contractor prices, so a reliable local dollar figure cannot be calculated from them. Ask licensed contractors for itemized quotes based on the property, expected depth, casing, access, pump, trenching, electrical work, testing and treatment.

How deep are wells in Foothills County?

The median recorded water-supply well depth is 135 feet. The middle 50% of 21,267 usable local records ranges from 85 to 200 feet.

What affects well drilling cost in Foothills County?

Important cost factors include required depth, casing and overburden, bedrock conditions, drill-rig access, mobilization, pump sizing, trenching, pressure equipment, water treatment and testing.

What should a Foothills County well drilling quote include?

Compare the drilling rate and minimum charge, included casing and grout, pump and pressure equipment, mobilization, trenching, electrical work, testing, restoration, taxes, exclusions and additional-depth terms.

Can nearby wells predict the cost of a new well in Foothills County?

Nearby records can show historical depth, geology, yield and construction patterns, but they cannot predict an exact new-well depth or price. Use them to test quote assumptions, then rely on a licensed contractor's written site-specific scope.

TRACEABLE WELL RECORDS

Deepest and shallowest wells in Foothills County

Well IDs connect these observations back to individual government records. Extremes should not be treated as expected depths.

Deepest recorded wells

#DepthMunicipalityYearWell ID
11,420 ftFoothills County1954126999
21,220 ftFoothills County1954238642
31,120 ftFoothills County1954125982
41,120 ftFoothills County1953130875
51,120 ftFoothills County1954238329

Shallowest recorded wells

#DepthMunicipalityYearWell ID
110 ftFoothills CountyNot reported122040
210 ftFoothills CountyNot reported127731
310 ftFoothills CountyNot reported127741
410 ftFoothills CountyNot reported127894
510 ftFoothills CountyNot reported127948
FIND WELLS NEAR YOUR PROPERTY

Regional statistics are only the starting point.

Well depths can vary within Foothills County. Enter your address to analyze reported wells around your exact location and build a preliminary property report.

Analyze my property

Source: Alberta Water Well Information Database (AWWID) · dataset through 2026-08-12 · Alberta domestic/stock/municipal water-well reports with recorded depths from 10 to 1,500 ft (imperial AWWID units). Regional counts use OData totals; depth percentiles use sampled report pages within each bbox. Information disclaimer: Historical records are planning context, not a site assessment or professional advice. Records may be incomplete, approximately located or unrepresentative of a future well. Open Government Licence – Alberta.

Planning a well?Contact us