Usable water-supply records with plausible depth values.
1,198 LOCAL WELL RECORDS
Well Drilling Cost in MD of Taber, Alberta
Well drilling cost in MD of Taber depends heavily on depth, casing, geology, access and quote inclusions. Local records show a 70 ft median depth and a 27–400 ft typical range to help frame contractor conversations.
Median recorded depth70 ft
50% shallower than Alberta's 140 ft median.
INTERACTIVE LOCAL WELL EXPLORER
Map and well records in MD of Taber
Search an address to focus nearby records, or filter by depth, yield and completion year. The sorted well list updates with the map.
Preparing map…
Half of usable records are shallower and half deeper.
More affected by unusually deep wells than the median.
The middle 50% of recorded depths.
Records below 10 ft are excluded.
An observed extreme, not a drilling expectation.
LOCAL COST CONTEXT
How much does it cost to drill a well in MD of Taber?
There is no trustworthy single price for MD of Taber. Official records do not include invoices, but they show that the middle half of recorded wells are 27–400 ft deep. Contractors must still price casing, geology, access, pump equipment, site work and exclusions for the specific property.
WATER & CONSTRUCTION SIGNALS
More than depth: what MD of Taber records contain
These fields come from a stratified sample of 1,198 local records and are shown with coverage counts.
Typical sampled range: 4.84–10 GPM across 81 records.
Middle 50%: —–— ft below ground across 0 records.
Unknown (330) · Drilled (316) · Hand Dug (257)
Newest sampled record: 2024 · 18 completed since 2015.
Recorded depth distribution in MD of Taber
0 ftMedian 70 ft460 ft
Most usable records fall between 27 and 400 ft. The average is 184 ft above the median, showing how extreme wells influence a simple average.
What stands out
- Regional depth contextThe local median is 50% shallower than Alberta overall.
- Useful pump-test coverage7% of usable records include a reported GPM value.
- Meaningful local variabilityThe middle half of wells spans 373 vertical feet.
ACCURATE COST PLANNING
What should a MD of Taber well quote include?
Compare written scopes rather than multiplying a regional depth by a generic per-foot rate.
Per-foot rate, minimum charge, bore diameter and what happens if the well must go deeper.
Included casing footage, material, extra-foot rate, grout and sanitary completion.
Pump, drop pipe, wire, pressure tank, controls, pitless adapter and installation.
Mobilization, rig access, trenching, waterline, electrical runs and restoration.
Pump testing, laboratory water tests and whether treatment equipment is excluded.
Taxes, permits or approvals, unsuccessful-hole terms and other stated exclusions.
Price disclaimer: WellEstimate does not have verified contractor transaction data for this region and therefore does not publish a regional dollar estimate.
Request a site-specific contractor quote →LOCAL COST QUESTIONS
MD of Taber well drilling cost FAQ
Practical answers grounded in local records, with the limits of preliminary planning made clear.
How much does it cost to drill a well in MD of Taber?
The official well records do not contain contractor prices, so a reliable local dollar figure cannot be calculated from them. Ask licensed contractors for itemized quotes based on the property, expected depth, casing, access, pump, trenching, electrical work, testing and treatment.
How deep are wells in MD of Taber?
The median recorded water-supply well depth is 70 feet. The middle 50% of 1,198 usable local records ranges from 27 to 400 feet.
What affects well drilling cost in MD of Taber?
Important cost factors include required depth, casing and overburden, bedrock conditions, drill-rig access, mobilization, pump sizing, trenching, pressure equipment, water treatment and testing.
What should a MD of Taber well drilling quote include?
Compare the drilling rate and minimum charge, included casing and grout, pump and pressure equipment, mobilization, trenching, electrical work, testing, restoration, taxes, exclusions and additional-depth terms.
Can nearby wells predict the cost of a new well in MD of Taber?
Nearby records can show historical depth, geology, yield and construction patterns, but they cannot predict an exact new-well depth or price. Use them to test quote assumptions, then rely on a licensed contractor's written site-specific scope.
TRACEABLE WELL RECORDS
Deepest and shallowest wells in MD of Taber
Well IDs connect these observations back to individual government records. Extremes should not be treated as expected depths.
Deepest recorded wells
| # | Depth | Municipality | Year | Well ID |
|---|---|---|---|---|
| 1 | 1,450 ft | MD of Taber | Not reported | 197856 |
| 2 | 1,165 ft | MD of Taber | 1951 | 223758 |
| 3 | 1,156 ft | MD of Taber | 1951 | 223791 |
| 4 | 1,152 ft | MD of Taber | 1951 | 223735 |
| 5 | 1,097 ft | MD of Taber | 1951 | 223633 |
Shallowest recorded wells
| # | Depth | Municipality | Year | Well ID |
|---|---|---|---|---|
| 1 | 10 ft | MD of Taber | 1934 | 121772 |
| 2 | 10 ft | MD of Taber | Not reported | 197948 |
| 3 | 10 ft | MD of Taber | 1910 | 202955 |
| 4 | 10 ft | MD of Taber | Not reported | 203427 |
| 5 | 10 ft | MD of Taber | Not reported | 203435 |
FIND WELLS NEAR YOUR PROPERTY
Analyze my propertyRegional statistics are only the starting point.
Well depths can vary within MD of Taber. Enter your address to analyze reported wells around your exact location and build a preliminary property report.
Source: Alberta Water Well Information Database (AWWID) · dataset through 2026-08-12 · Alberta domestic/stock/municipal water-well reports with recorded depths from 10 to 1,500 ft (imperial AWWID units). Regional counts use OData totals; depth percentiles use sampled report pages within each bbox. Information disclaimer: Historical records are planning context, not a site assessment or professional advice. Records may be incomplete, approximately located or unrepresentative of a future well. Open Government Licence – Alberta.